9 Materials That Are Needed When Replacing Your Roof
When you get a new roof installed on your home, more than just the shingles need to be replaced. Your contractor is going to use a range of various materials to replace your existing roof. It is essential to upgrade everything all at once so that your roof is in the best condition possible.
Material #1: Decking
Your decking may or may not need to be replaced. It is the solid structure that makes up your roof, generally made from wood boards. Any decking that is compromised should be replaced before new material is placed on top of it.
Material #2: Flashing
Flashing is placed where your shingles run into other things, such as an open valley, chimney, or wall. They help protect against water intrusion.
Material #3: Underlayment
The underlayment is really important as it lays between your shingles and decking and acts as another line of defense against water getting into your home. You should always use an underlayment that works well with the type of shingles you are installing on your roof.
Material #4: Drip Edge
Another vulnerable part of your roof is the drip edge, where water flows off the edge of your roof into the gutters. A drip edge helps to ensure that the corners and edge of your roof are reinforced and protected against all the wear they undergo.
Material #5: Ice and Water Shield
The ice and water shield are designed to provide extra support to the valleys on your roof. They get more water flowing on them over time, and adding an ice and water shield helps to protect this area that gets a lot of usages and wear on your roof. An ice and water shield can protect against leaks and oversaturation.
Material #6: Shingles
The material that you will need the most and is the most visible roofing material. You will want to choose shingles designed for your particular area and climate for the best strength and longevity.
Material #7: Ridge Capping
The areas where the various sides of your roof meet should have a ridge cap on them. This helps protect this vulnerable area where your roof meets together and is visually appealing as well. It helps to reinforce the corners of your structure.
Material #8: Roof Vents
The vents help move air out of your attic, which helps protect your roof from the underside. Your contractor should evaluate your ventilation system and upgrade it as appropriate to protect your roof.
Material #9: Pipe Boots
Pipe boots go around all the pipes that come through your roof. They are made from synthetic rubber and should be replaced when everything else is, as they tend to crack and degrade over time.
With a quality roofing job, your contractor is going to replace far more than just your shingles. They will replace all the materials on your roof to make everything new and in the best possible condition.
Contact a local roofer to learn more about roof replacement.